SEH Computertechnik SEH PS1109 Manuel d'utilisateur télécharger pdf (Page 14)

14 Hardware Installation Guide

 Mounting the Print Server

The print server is a so-called slot card that is simply inserted into the provided slot.

Use KUIO 3,3 Volt Interfaces ONLY!

For more information,

please consult your retailer.

THE USE OF A 5 VOLT INTERFACE

WILL DAMAGE YOUR PRINT SERVER!

Prepare the printer

Proceed as follows:

1. Turn the printer off.

2. Disconnect the printer's power cord.

3. Remove the screws from the interface cover.

4. Remove the metal cover.

Insert the print server

Proceed as follows:

1. Insert the print server board into the slot until the board locks

into the receptacle.

2. Fasten the print server board screws.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

SEH Computertechnik SEH PS1109 Manuel d'utilisateur Page 14